Split type mold laser welding machine NL-W200\400\500

Applications:S136, SKD-11, NAK80, 8407, 718, 738, H13, P20, W302, 2344, etc. Die steel, carbon steel, common alloy steel, stainless steel, beryllium copper, copper and hard alloy material.


details

Application of this Split type mold laser welding machine NL-W200\400\500

Imported spotlight cavity from Britain, corrosion resistance, high temperature resistance, cavity life (8-10 years), pulse xenon lamp life of more than 10 million times Fiber laser source principle:Fiber lasers source are mainly composed of pump source, coupler, doped rare earth fiber, resonant cavity and other components. The pumping source consists of one or more high-power laser diode arrays. The pumped light is coupled into the rare earth doped fiber as a gain medium by a special pump structure. The photons at the pump wavelength are absorbed by the doped fiber medium to form a particle number inversion. The excited light waves are fed and oscillated through the resonator mirror. Forming laser output.Full servo drive control part, repetitive positioning accuracy 0.02mm, high processing efficiency, continuous wave fiber laser repetitive processing accuracy more accurate.Looking forward to your inquiry for this Continuous fiber laser welding machine

 

Features of this Split type mold laser welding machine NL-W200\400\500

1, X, Y manual working platform, electric Z axis lifting, convenient operation.
2. The heat affected zone is small, the welding depth is large, the melting is sufficient, and no repair marks are left.
3. The laser can move up and down, forward and backward, and the worktable can be operated electronically. It is mainly used for repairing large and medium-sized molds.
4. LCD light shield can automatically adjust the amount of light shielding according to the pulse width to protect the operator's eyes from strong light damage.
5. Adjustable gas protection switch, blow in advance and delay gas off to ensure that the welding spot is not oxidized
 
 
Parameters of this Split type mold laser welding machine NL-W200\400\500
 
Model NL-W200 NL-W400 NL-W500
Laser power 200W 400W 500W

Laser frequency

1~100 Hz 1~80 Hz 1~80 Hz

Welding penetration

0.1~2.0mm 0.3~2.5mm 0.4~3.0mm

Light spot adjustment range

0.1~2mm 0.1~2.5mm 0.1~3mm

Cooling mode

Water-cooling 1P Water-cooling 3P Water-cooling 5P

Power demand

Single-phase AC220v/50Hz Three-phase AC380v/50Hz Three-phase AC380v/50Hz

Equipment power

6 KW 12 KW 18 KW

Whole machine weight

300 Kg 340 Kg 360 KG

Wavelength

1064 nm 1064 nm 1064 nm

Light spot adjustment mode

Manual Manual Manual

Positioning observation system

Microscope Microscope Microscope

Focal length range

120 mm 120 mm 120 mm

Blow protection

Argon Argon Argon

Floor area

2.5*2 m 2.5*2 m 2.5*2 m

Working temperature

0~40℃ 0~40℃ 0~40℃

Working humidity

10~75% 10~75% 10~75%

Environmental requirements

No vibration, no interference source, keep ventilation. No vibration, no interference source, keep ventilation. No vibration, no interference source, keep ventilation.

Consumables

Xenon lamp, filter core, protective lens, purified water, argon. Xenon lamp, filter core, protective lens, purified water, argon. Xenon lamp, filter core, protective lens, purified water, argon.

Welding body size

400*400*1500 mm 400*400*1500 mm 400*400*1500 mm

XYZ stroke of welding body

- - -
XY stroke 200*200 mm 200*200 mm 200*200 mm
XY drive mode Manual Manual Manual
Cabinet size 700*550*950 mm 700*550*950 mm 700*550*950 mm
Table size 540*440*650 mm 540*440*650 mm 540*440*650 mm
 
Pictures of this Split type mold laser welding machine NL-W200\400\500
 

Sample map

 

 

 

LEAVE YOUR MESSAGES

Send Inquiry Now